Label maker question

I got one of these, wish I got it years earlier. Plus it can do labeling on heatshrink, they have labels for cables, etc it’s just badass. Not sure if I have exactly 210 or 211, cats napping on me so can’t look. Google on 210 looks like mine. It is a bit big, and I think a little expensive for label makers, but it’s great - love it

That’s some bullshit, is this recent? I’d like to see their stock price going down

I been using the same one for 10 years. Tapes are cheap online

Unfortunately not, they added rfid crap to their newer models roughly three or four years ago. Good luck running a 550 with off brand labels :(

Don't get a Dymo. They added fucking DRM to their labels

lmao no way, bastards

Upvote on this. We got a Brady M210 and it's been killer.

Brother handheld ones are pretty good have 3 in my office and 1 at home only had to replace one after like 6 years.

Brady M210

Just make sure the backing splits down the middle. You'll thank me later.

Brother PTE110

For general use, I like my Brother P-Touch - it's at least 20 years old and still works great. It is a bit on the large size, but still portable and runs on something like 8 AA batteries. It works for labeling things like devices and such, but not as good for labeling cabling or wires. If I were to get another label printer, I would likely look at the Brady printers - more expensive, but also more variety in print media available. A single Brady, such as the M210, can print almost the same labels the P-Touch can (the M210 can only do up to 0.75" while the P-Touch can do 0.94" wide tapes), but the other types of labels it can support more than make up for that - heat shrink, self-laminating, flag, etc. are all available with the Brady, but not the Brother.

Brady

I just got a Brady M211 and I really like it. I really prefer the smaller size of the M211 over the larger units with the screens. The big screens and keyboard just make the printer very bulky. As for the M211 the app works great and even allows me to print from a spreadsheet. And the unit has a built in rechargeable battery, so no scrounging around for 40 AA batteries or a plug.

The Brady printers and materials are the superior choice. The M210 prints your general purpose labels and actually good labels for cables . If you're doing a lot of labels especially in anything other than just an office environment check out the M410 or M610 if your budget allows. I've also used use the Brother P Touch types. They are great for general purpose labeling, putting an ID label on something, but if you want options with serialization, smaller text size, cables, durable labels, you should just look toward Brady.

Brother. Their P-touch lineup has some good stuff. For $100 you get a portable cube that can plug into your laptop and does barcodes automatically. Plug it into the laptop, hook it up to an Excel spreadsheet, and let the label maker go brrrrrr

Get a Brady, they're best. I currently have a Dymo but, once the label stock I have runs out, I'll be trading up.

We use a Brother E110. Can be set to print regular labels and cableflags so both sides say the same thing. Can fit multiple different size and color labels

NIIMBOT

We have a few Brothers that have been running like a champ for nearly 20 years. I've got a Dymo at my other shop, I like that one because I don't have to by the heat shrink tape for it =D

I have a couple of Dymo Rhino 4200's. I would have preferred to go to a higher model for 1" labels, but this is fine. I've found that the aftermarket cartridges don't work that well, or at least haven't found any that work great as far as the print quality or adhesive breaking down over time. That said, we also have a Brady labeler or two and I think those are better quality overall.

We got a Brother D460BT and a stack of knockoff tapes from Aliexpress. Works perfectly for machine and cable labeling, but I don't think it can do stuff like QR codes (even with the thickest tape) Yes, we wanted something keyboard sized rather than handheld, but I'm not a field tech

Brother P-Touch But really any label maker that you can hook up to your computer. It's so much easier to print labels from a computer application to the label printer. Trust me it's a game changer. When you have to print out like dozens of labels. And if you're doing inventory work you can use your spreadsheets or whatever and copy and paste into the label maker software.

Brady, Epson, Brother. In that order. All others are inferior and waste of time.